HVE 3000 Flood Pumper
Product Description
High vacuum and powerful lift pulls maximum water from carpet and pad fast while a clog-resistant, high-volume industrial pump delivers up to 50 gpm. A narrow profile and large rear wheels make transport easy. The unit can also be used with a truckmount to boost vacuum or intercept extracted water to keep truckmount tank from filling up.
Sizes ▪ Options
F479: One unit
Specifications
Static pressure (Blower 1): 8 in. Hg | 108 in. H2O
Static pressure (Blower 2): 10 in. Hg | 136 in. H2O
Static Pressure (Both blowers): 12 in. Hg | 164 in. H2O
Pumpout discharge rates: 50 gpm (1.5 in. outlet); 12 gpm (0.75 in. outlet)
Legend Rewards:
see all specifications
Featured Videos

Features
Documents
Specs
Accessories
Reviews

Features

Features
  • Clear-view first-stage filter lifts out for easy rinsing.
  • A high flow, high volume clog-resistant sump pump handles up to ½ in. solids.
  • Rugged construction. Low center of gravity provides balanced transport; easy on stairs!
  • Use the HVE 3000 to bypass the truckmount waste tank for black water flood extraction to keep the tank clean.
  • Accessories included One 25 ft. section of 2 in. vacuum hose with cuffs
  • Dual vacuum blowers with 2 in. inlet ensures maximum airflow.
  • Easy maneuverability – just pull on the hose! Slim profile to fit through the narrowest doors – only 22.5 in. wide.
  • Large capacity waste tank. 12 gallon tank means fewer trips to the drain when you're not using the auto-pumpout system.
  • Two auto-pumpout options: barbed outlet for a 1½ in. drain hose and a ¾ in. converter outlet fitting for use with a standard garden hose. 
  • Use the large toilet-height gravity drain for small jobs and easy tank cleanout. 
  • Exhaust air passes through HEPA filter. Helps to prevent the spread of contaminants and odors and conforms to 2015 IICRC S500 (13.3.3) recommendations. 

Documents

Specs

Specs
  • Static pressure (Blower 1):  8 in. Hg | 108 in. H2O
  • Static pressure (Blower 2):  10 in. Hg | 136 in. H2O
  • Static Pressure (Both blowers):  12 in. Hg | 164 in. H2O
  • Pumpout discharge rates:  50 gpm (1.5 in. outlet); 12 gpm (0.75 in. outlet)
  • Dimensions (W × H × D):  22.5 × 40.2 × 23.6 in. | 57.2 × 102.1 × 59.9 cm
  • Weight:  132 lbs. | 60 kg
  • Volts:  115V
  • Amps:  
    12A (Blower 1 + Pumpout)
    13.5A (+Blower 2)
  • Frequency:  60Hz
  • Tank capacity:  12 gal. | 45L
  • Power:  115V
  • Safety:  ETL listed to UL/cUL and CSA standards.
  • Xactimate:  WTR EXT (+ & W)
  • Legend Rewards: 
    2,000
Videos

Accessories

Reviews

Reviews
Customers get bonus Legend Rewards for sharing their product feedback
Email your reviews to market@legendbrands.com
“The HVE works really well for us. It’s got easy maintenance and operation. We really like that the rotomolded plastic is household friendly. It’s better than stainless steel if we happen to bump up against a wall or a piece of furniture. We try to be careful, of course, but the rounded edges are more forgiving when moving the unit around on job sites.”

--Darrel Depot, PuroClean, Williston, VT
"Most of the time I use the HVE 3000 to pump out flood water, but I've also used it on a job in Malibu where my van was so far above me on the hill that my truckmount wouldn't carry the water up the vac hoses. So I used my HVE 3000 to extract."

–David Glaze, Approved Carpet Care, Thousand Oaks, CA
"At Anchor Carpet Cleaning, we mainly use our HVE 3000 as a booster for our truckmount when we have to use a lot of hose like when cleaning boats out on a long dock. The HVE 3000 works great – keeps the power right we're we need it!"

–Richie Anchor, Anchor Carpet Cleaning, Cape Vincent, NY
"Very innovative thinking in the design and functionality of this unit. First round pad testing shows great promise as a stand-alone unit. Simple operation and setup is good, along with the versatility of using it as a booster to truckmount. This unit can be a viable choice for the contractor."

–Jerry Blaylock, Owner/Instructor, American Drying Institute